Setting Up Ldap Settings; Ldap Server Registration Parameters - Konica Minolta bizhub C450 Network Scanner Operations

Specifying settings from the control panel
3.16

Setting up LDAP settings

The LDAP server can be registered and authentication settings can be spec-
ified.

LDAP server registration parameters

The LDAP server registration parameters are as follows:
Setting up LDAP screen 1/4
Item
Server Address
Search Base
Check Connection
Reset All Settings
Setting up LDAP screen 2/4
Item
Enable SSL
Port No.
General Settings
Check Connection
Reset All Settings
C450
Description
Sets the IP address of the LDAP server. Use the keyboard
that appears in the touch panel to type in the address (up
to 255 characters).
Sets the directory path of the LDAP server. Use the
keyboard that appears in the touch panel to type in the
address (up to 255 characters).
Checks the connection to the LDAP server.
The LDAP server settings can be reset to their factory
default.
When a reset confirmation message appears, touch [Yes].
Description
Sets whether to use SSL (data encryption) when
connecting to the LDAP server.
Sets the port number of the LDAP server. To change the
value, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Sets the authentication method used when logging on to
the LDAP server. For details on specifying the settings,
refer to "General settings" on page 3-76.
Checks the connection to the LDAP server.
The LDAP server settings can be reset to their factory
default.
When a reset confirmation message appears, touch [Yes].
3
3-71