Ldap Setting - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
(6) Division Settings
<Page Division>
Functions • To set whether or not to make page division during transmission.
Use • To transmit data by dividing it by the page.
• The default setting is "OFF".
Setting/
Procedure
<Binary Division>
Functions • To set whether or not to make binary division during transmission.
Use • To transmit data through binary division.
• The default setting is "OFF".
Setting/
Procedure
<Binary Division Size>
• To set the binary division size.
Functions
• To set the binary division size when Binary Division is set to [ON].
Use
• The default setting is "500 KB".
Setting/
• Setting range: 16 to 2000 KB
Procedure
• Enter the value from the 10-Key Pad and touch [Enter].
9.5.6

LDAP Setting

A. LDAP Search
Functions • To enable or disable address search using the LDAP server.
Use • To enable address search using the LDAP server.
• The default setting is "No".
Setting/
Procedure
B. LDAP Server Setting
(1) LDAP Server Name
Functions • To set the LDAP server name.
Use • To enter the LDAP server name.
1. Touch the [LDAP Server Setting].
2. Touch the LDAP server key to be registered or changed.
Setting/
3. Touch the [LDAP Server Name].
Procedure
4. Enter the LDAP Server Name of the local machine from the 10-Key Pad or the key-
board on the screen and then touch [Enter].
(2) Server Address
Functions • To set the IP address of the LDAP server.
Use • To enter the IP address of the LDAP server.
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
ON "OFF"
ON "OFF"
Yes "No"
9. Utility/Counter Mode
135