Specifying Settings For Administrator Forwarding (Mode 024); Factory Settings; Specifying Settings For Administrator Forwarding - Konica Minolta bizhub c200 User Manual

Specifying machine functions (software switch settings)
Bits Description
3 Specify whether or not an image of the transmitted docu-
ment is added to the results report.
−
2-0
2.5.7

Specifying settings for administrator forwarding (mode 024)

Specify whether or not transmitted originals are forwarded to the recipient specified as the administrator.

Factory settings

Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7 Specify whether or not transmitted originals are forwarded to
the recipient specified as the administrator.
6 Specify whether or not originals are forwarded to the admin-
istrator during scan transmissions.
5-4 Specify the conditions for printing the result report when
originals are forwarded to the administrator.
(If the forwarding destination is a computer, the result report
is not printed, regardless of the setting specified here.)
−
3-0
Note
Bits 6, 5 and 4 are available only if bit 7 was set to "1" (Forwarded).
C200
7654 3210
1101 0001 (HEX: D1)
Settings Details
0 Is not added
1 Is added
000 *Do not change the settings
for these bits.
Settings Details
0 Not forwarded
1 Forwarded
0 Not forwarded
1 Forwarded
00 Not printed
01 If transmission failed
10 If printed normally
11 *Do not specify these set-
tings.
0001 *Do not change the settings
for these bits.
2
2-25