2
2.3
Precautions
Observe the following precautions to maintain the machine in its best possi-
ble condition.
2.3.1
Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the
machine in a location that meets the following requirements:
A location away from curtains, etc. that may catch fire and burn easily
-
A location that is not exposed to water or other liquids
-
A location free from direct sunlight
-
A location out of the direct airflow of an air conditioner or heater, and not
-
exposed to extremely high or low temperatures
A well-ventilated location
-
A location that is not exposed to high humidity
-
A location that is not extremely dusty
-
A location not subjected to undue vibrations
-
A stable and level location
-
A location where ammonia or other organic gases are not generated
-
A location that does not put the operator in the direct airflow of exhaust
-
from the machine
A location that is not near any kind of heating devices
-
2.3.2
Power Source
The power source requirements are as follows.
Voltage Fluctuation: AC 220-240 V ± 10 Hz
-
Frequency Fluctuation: Within ± 3Hz
-
Use a power source with as few voltage or frequency fluctuations as pos-
-
sible.
2-8
Safety Information
bizhub 131f/190f