Layout and installation
8
The "Found New Hardware Wizard" appears again. Repeat the same
procedures from steps 12 to 16.
9
Click [Finish].
The driver installation is completed.
Activating your device option(s)
If your machine has device options, you must open the printing preferences
and activate them.
To activate the device option(s):
1
Click [Start] % [Settings] % [Printers].
2
Right click the KONICA MINOLTA GDI printer icon, then click [Printing
Preference].
3
Click the [Device Option] tab.
4
Select the device(s) installed on your machine.
5
Click [OK], then close the printing preferences.
Note
The duplex unit is available only for bizhub 190f.
bizhub 131f/190f
3
3-31