Konica Minolta BIZHUB 190F User Manual page 58

3
For Windows XP/Server 2003 users
Note
Make sure that you followed the installation steps 1 to 11 described on
"Local install: Windows USB port" on page 3-25.
1
Plug the USB cable to your machine and then connect it to your com-
puter.
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2
Turn your machine on.
3
The "Found New Hardware Wizard" will appear. Click [Next].
4
Select "Install from a list or specific location" and click [Next].
5
Select "Include this location in the search" and clear any other choices.
Click [Browse] to navigate your hard disk: C:\KONICA_MINOLTA_131f/
190f_GDI, and then click [OK].
6
Click [Next].
7
If the "Windows Logo testing" dialogue box appear, click [Continue An-
yway] to install the driver.
8
Click [Finish].
3-32
Layout and installation
bizhub 131f/190f