Konica Minolta BIZHUB 190F User Manual page 199

Maintenance and Troubleshooting
Message on the LCD
Enter No. (0-32)
Enter Reduce/Enlarge
Enter Scan Size
Enter Name
Feeder In Use
Hang Up Phone
In Relay Box or In Se-
cure Box
Invalid I.D. Code
Invalid Number
Invalid Passcode
Invalid Password
Line Busy
Macro In Use
Memory Overf low
Start or Cancel
Memory Overf low
Press Stop
Mirror Carriage Error
Mirror Locked
No Command Stored
bizhub 131f/190f
What it means/What to do
You tried to enter a call group number greater than 32. Your machine
can maintain 32 call groups, numbered 1–32 (call group 0 covers all the
groups). Enter the correct call group identifier number
You tried to copy your document on the paper other than A4, A5 or F4
size using the bypass tray, or the calculated zoom ratio is out of the ac-
ceptable range (25 – 400 %). Enter the zoom ratio manually although a
part of the image might be lacked, or change the paper for copying.
When you using the document glass, you must manually enter the scan
size of your document. Press [DOCUMENT SIZE] to choose the size.
You entered a blank on the user name entry mode. Enter the user name.
The command you are trying to enter requires the use of the ADF, which
is already in
use. Wait for the machine to stop using the ADF, then try again.
The external telephone is not sitting completely on its cradle.
You tried to store a document into the F-code box which is set to be a
relay box or security box. Select the F-code box which is set to be a
bulletin box.
The F-code box I.D. code you entered is not valid. Try re-entering your
F-code box I.D. code.
You pressed a key which has no function during the current operation.
The protection passcode (see "Security features [CD]" on page 13-3)
you entered is not valid. Repeat the operation, entering the correct pro-
tection passcode.
The password you entered is not valid. (See "Security features [CD]" on
page 13-3.) Enter the correct password.
You tried to erase a document which someone is polling from your ma-
chine. Wait for the fax to complete the polling operation.
You tried to change the function for a Soft key, but that Soft key has
been programmed in a Macro key. You cannot change the Soft key
function until erase the Macro key that contains the Soft key you want
to change. Erase the Macro, then try again.
You tried to enter more pages into memory than your machine could
store. Press [START] to tell your machine to keep as many pages in
memory as possible, or press [CANCEL] to delete from memory all pag-
es stored during this operation (but not previous operations).
In PC printing, the machine received data more than it can f it in mem-
ory. Press [STOP] to cancel the printing job. Either delete unnecessary
documents, retry after more memory becomes available, or split the
printing into more than one operation.
The mirror carriage of your machine has become inoperable. Contact
your local technical representative.
The transport mode is not turned off. Turn off the transport mode (see
page 3-15).
You pressed [JOB CONFIRM./FAX CANCEL] to review upcoming com-
mands, but your machine had no stored.
– or –
You pressed a macro key which is not programmed any command.
16
16-21