Konica Minolta BIZHUB 190F User Manual page 56

3
For Windows 2000 professional users
Note
Make sure that you followed the installation steps 1 to 11 described on
"Local install: Windows USB port" on page 3-25.
1
Plug the USB cable to your machine and then connect it to your com-
puter.
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2
Turn your machine on.
3
The "Found New Hardware Wizard" will appear. Click [Next].
4
Select "Search for a suitable driver for my device" and click [Next].
5
Select "Specify a location" and clear any other choices, then click
[Next].
6
Click [Browse] to navigate your hard disk: C:\KONICA_MINOLTA_131f/
190f_GDI, and then click [OK].
7
Click [Next]. If the "Digital Signature Not Found" dialogue box appear,
click [Yes] to install the driver.
3-30
Layout and installation
bizhub 131f/190f