Konica Minolta BIZHUB 190F User Manual page 61

Layout and installation
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2
Turn your machine on.
3
The driver software will be installed automatically.
4
When the drivers have been installed correctly, the message "Your de-
vices are ready to use" will appear.
Note
After the driver installation, you need to configure the "Device Option"
setting to activate either or both the 2nd Paper Cassette or/and Duplex
Unit (The Duplex Unit is available only for bizhub 190f.) See "Activating
your device option(s)" on the next page for instructions on how to do this.
Activating your device option(s)
If your machine has device options, you must open the printing preferences
and activate them.
To activate the device option(s):
1
Click [Start] % [Control Panel].
2
Click [Hardware and Sound].
3
Click [Printers].
4
Right-click the KONICA MINOLTA GDI printer icon, then click [Printing
Preferences...].
5
Click the [Device Option] tab.
6
Select the device(s) installed on your machine.
7
Click [OK] and close the printing preferences.
Note
The duplex unit is available only for bizhub 190f.
bizhub 131f/190f
3
3-35