Konica Minolta BIZHUB 190F User Manual page 141

Sending Faxes
Sending a fax using the Document glass
1
Switch to the Fax mode by pressing
the "Copy/Fax/Scan" button.
2
Place your document on the document glass. (See page 4-9 for de-
tails.)
3
Press [Doc. Size] to select the document size, A4, A5 š or F4.
4
Adjust the scanning resolution and contrast, if necessary. (See
page 9-3.)
5
Dial the fax number.
Use the numeric keys to dial a number.
-
or
Press a one-touch key. (See page 8-5.)
-
or
Press [Speed Dial/Group] and three-digit code. (See page 8-15.)
-
or
Use the call group dialing. (See page 8-16.)
-
or
Use the phone directory dialing. (See page 8-16.)
-
6
Press [Start]. (If you pressed a one-touch key, no need to press [Start].)
By pressing [Start], you are just given
your machine a command.
This command number appears on
the first line of the LCD for a few sec-
onds. You will need to know this
command number if you later wish to cancel the transmission or to print
a stored document. (See
page 9-12
7
When the scanning is done, the ma-
chine will show:
8
Place the next page, then press [Paper Size/Next Doc.].
Otherwise, press [Start] to start the transmission.
bizhub 131f/190f
"Reviewing or cancelling commands [CD]" on
.)
9
9-9