Konica Minolta BIZHUB 190F User Manual page 200

16
Message on the LCD
No Department Code
No Document Stored
No Drum
No Number Stored
No Passcode
No PIN Number
No Report
No Toner Cartridge
No User Data
Not Allowed in Macro
Open Front Cover
Follow Instruction A
Open 1st Side Cover
Please Remove Paper
Open&Close Scan-
Cover Reset Docu-
ment
Paper Mismatch Set
XXX paper Press Stop
Paper Mismatch
Roteta the paper
Press Stop
Please Call Service
XXX
16-22
Maintenance and Troubleshooting
What it means/What to do
You tried to turn on the department code setting but there are no de-
partment codes stored in your machine. Store at least one department
code.
– or –
You entered incorrect department code at fax sending while the depart-
ment feature is on. Enter correct department code.
You tried to print a document from memory, but your machine had none
stored.
The drum cartridge is missing or has not been properly installed in your
machine. Please properly install the drum cartridge.
You selected an autodialer, batch box or F-code box number for which
there is no fax (or phone) number programmed. Either choose another
number or dial a phone number directly from the numeric keys.
You tried to program a security feature (see "Security features [CD]" on
page 13-3), but there are no protection passcode stored in your ma-
chine. Store a protection passcode (see "Security features [CD]" on
page 13-3).
You selected "Mode1" in the PIN mask feature and tried to call an au-
todialer number in which no PIN has been entered, or to call using nu-
meric keys without PIN. Enter a PIN.
You requested an activity journal or transmit conf rmation report, but
your machine has no record of any fax jobs having occurred.
The toner cartridge is missing or has not been properly installed in your
machine. Please properly install the toner cartridge.
You tried to proceed with the operation for program No. 384 "Activating
the user authentication", 385 "Resetting the user counter", or 5125
"Printing a user authentication list" without any user registration. Reg-
ister users' information first. (See "Security features [CD]" on
page 13-3.)
During macro registration, you pressed the key which cannot be regis-
tered in Macro.
The charge wire of drum cartridge is dirty. Clean the charge wire. (See
page 16-5) Your machine can print about 100 sheets after this message
appears, but afterwards the machine displays "Printer Not Usable" and
cannot print any page until the charge wire is cleaned.
The paper jammed in your machine. Open the side cover and remove
the jammed paper gently and carefully. (See page 16-15)
Either your document was not inserted correctly, or the fax to which you
are sending can not handle the document's page length. Reset the
page and try again.
In PC printing, the size of paper in the paper cassette is not match up
the paper size you specified by printer driver. Press [STOP] to cancel a
print job. Then set the correct size of paper and try printing again.
In PC printing, the direction of the A5-sized paper on the bypass tray is
wrong. A5 is not available for PC printing. Set the A5 on the bypass tray.
The printer unit of your machine has become inoperable. Contact your
local technical representative.
bizhub 131f/190f