Konica Minolta BIZHUB 190F User Manual page 54

3
3
The "Add New Hardware Wizard" will appear.
In Windows Me, select "Specify the location of the driver (Advanced)"
and click [Next].
In Windows 98SE, click [Next]. Then select "Search for the best driver
for your device.(Recommended)" and click [Next].
4
In Windows ME, select "Search for the best driver for your device" and
"Specify a location".
In Windows 98SE, select "Specify a location" and clear any other
choices.
5
Click [Browse] to navigate your hard disk: C:\KONICA_MINOLTA_131f/
190f_GDI, and then click [OK].
6
Follow the instructions that appears on the window until you can click
[Finish].
7
The "Add New Hardware Wizard" appears again. Repeat the same pro-
cedures from steps 3 to 6 three more times until the installation is com-
pletely finished.
After the driver installation, you need to configure the "Device Option"
setting to activate either or both the 2nd Paper Cassette or/and Duplex
Unit. (The Duplex Unit is available only for bizhub 190f.) See "Activating
your device option(s)" on the next page for instructions on how to do
this.
3-28
Layout and installation
bizhub 131f/190f