Paper Type Setting - Minolta CF 9001 User Manual

Making Copies

Paper Type Setting

If nonstandard paper has been set for
any of the paper sources, the symbol
, , or
select key on the touch panel.
The following three different types of paper can be designated for each
paper source.
: Plain Paper (75 g/m
When this setting is made, the paper source can be a candidate for Auto
Paper.
: Thin Paper (64 g/m
This setting excludes the paper source from selection for Auto Paper.
Make this setting for the source loaded with thin paper to prevent the
paper from being used for a wrong purpose.
: Thick Paper 1 (91 g/m
This setting excludes the paper source from selection for Auto Paper.
Make this setting for the source loaded with thick paper to prevent the
paper from being used for a wrong purpose.
The paper type settings are to be made by your Technical Representative.
For more details, consult your Technical Representative.
NOTE
è Only plain paper can be used for 2-sided copies.
CF9001
appears on the paper
2
to 90 g/m
2 2
to 74 g/m
2
to 128 g/m
2
)
)
2
)
3
3-13