Table of Contents
Advertisement
Setting the Utility Mode
4
Touch [GRADATION ADJUST].
5
Press the Start key.
6
The copier produces a test print.
7
Place the test print produced on the
Original Glass as shown.
8
Cover the test print with 10 sheets
of blank, white A3 or 11"×17" size
paper.
9
Close the Original Cover and press
the Start key.
10
When the copier is through with the
Gradation Adjust sequence, the
menu screen reappears.
è
Repeat steps from 4 to 9 three times.
CF9001
5
5-19
Advertisement
Table of Contents
