Table of Contents
Advertisement
When a Message Appears
11
Pull out the sheet of paper from the
upper area of the transfer/fusing
unit.
12
Turning knob M9, remove the sheet
of paper. If paper is stuck to the
transfer film, carefully disengage
the leading edge of the paper and
remove it with care not to damage
the transfer film.
13
Press down the roller as shown and
remove the sheet of paper if present
inside.
14
Slide the transfer/fusing unit back
into the copier and turn the release
lever "M4" to the right.
15
Close the front door.
Paper Trays
1
Open the left door "L1" and pull out
the sheet of paper from the
transport section.
2
Close the left door "L1".
3
Slide the tray out.
CF9001
6
M9
M6
M4
6-15
Advertisement
Table of Contents
