Table of Contents
Advertisement
7
Symptom
The copy has dark specks or
spots.
The edge of the copy is dirty.
7-2
Possible Cause
The original glass is dirty.
The original pad or
document feed belt is dirty.
The original is very thin or
highly transparent.
The original is two-sided.
The original pad or
document feed belt is dirty.
You have selected a paper
size larger than the original.
(Zoom Ratio is set at full size
100%)
The original is not placed in
the correct direction. (Zoom
Ratio is set at full size
100%.)
The reduction ratio selected
is not in accord with the copy
paper size. (When doing
manual
reduction copying.)
Troubleshooting
Action
Wipe the glass clean with a
soft dry cloth, see page 8-7.
Wipe the original pad or
document transport belt
clean with a soft cloth
dampened with mild
detergent, see page 8-7.
Place a blank sheet of paper
over the original,
see page 3-4.
The information on the back
side of a two-sided, thin
original may be slightly
reproduced on the copy.
Touch the [DENSITY] key
and set Background to
[AUTO] or Lighter, see page
3-24.
Wipe the original pad or
document transport belt
clean with a soft cloth
dampened with mild
detergent, see page 8-7.
Select the same copy paper
size as the original, see page
3-11.
Or, use the Auto Size mode
to enlarge the copy to the
appropriate size,
see page 3-18.
Select the paper tray that is
loaded in the same direction
as the original,
see page 3-12.
Or, reload the paper in the
same direction as the
original, see page 6-2.
Select the zoom ratio
according to the copy paper
size, see page 3-18.
Or, use the Auto Size mode
to reduce the copy to the
appropriate size,
see page 3-18.
CF9001
Advertisement
Table of Contents
