Table of Contents
Advertisement
2
Useful Tip
The time for the copier to enter the Energy Saver mode can be
selected from 1 to 240 min. by using User's Choice, see page 5-30.
Auto Copy Start Function
Even during the copier warm-up, the copier is set into the Auto Copy Start
function by loading the originals onto the duplexing document feeder and
pressing the Start key.
This function allows a copy process to be started as soon as the copier
completes warming up (which takes approx. 9 min.).
Interrupt Mode
The Interrupt mode allows you to interrupt a current job and run a different
one. Pressing the Interrupt key once sets the copier into the Interrupt
mode. Pressing the key again cancels the Interrupt mode and returns to
the previous settings.
NOTES
è
Pressing the Interrupt key resets all settings to the initial ones.
For details, see "Default Settings", see page 5-1.
è
Some functions set before the Interrupt mode disable Interrupt
copying. Further, when in the Interrupt mode, the copier defies setting
of some functions.
For more details, see "Function Combination Matrix", see page 8-9.
è
To cancel an Interrupt cycle, you need to press the Interrupt key. The
Panel Reset key or Auto Panel Reset function does not serve this
purpose.
2-14
Getting to Know Your Copier
CF9001
Advertisement
Table of Contents
