Table of Contents
Advertisement
5
5.9
User's Choice
This function allows you to select customized default settings that are
automatically selected when the copier is powered ON. It eliminates the
need of making selections again to suit your needs every time the copier
is turned ON or the panel is reset.
User's Choice Functions
Item
Language
Energy Saver
Auto Reset
Confirmation Beep
Key Counter
Intelligent Sort
Custom 2in1
ACS Judgement
Level Adjust.
5-30
Description
Select the language to be displayed on the touch panel. The initial
setting is English.
Select whether to set the copier into the Energy Saver mode (ON) or
not (OFF) after a given period of time after the copy cycle has been
completed or a key pressed. When "ON" is selected, set the time to
enter this mode, which can range from 1 to 240 min., into the 10-key
pad. The initial setting is "15 min."
Select whether to reset the control panel settings (ON) or not (OFF)
after a given period of time after the copy cycle has been completed
or a key pressed. When "ON" is selected, set the time to activate this
function, which can range from 1 to 9 min., into the 10-key pad. The
initial setting is "5 min."
Select whether to turn "ON" or "OFF" the confirmation beep that
sounds when any of the keys on the touch panel is pressed. The
initial setting is [ON].
Select whether to reset (ON) the control panel settings or not (OFF)
when the plug-in counter is unplugged or magnetic card is removed.
The initial setting is [ON].
Select whether to turn the Intelligent Sort function ON (Auto Select)
or OFF (Non-Auto) to automatically switch between Sort and Non-
Sort according to the number of originals, when a copy cycle is run
on a copier system equipped with a sorter and duplexing document
feeder, both activated. Non-Sort is selected when the number of
originals is 1 and Sort is selected when the number of originals is 2
or more.
The initial setting is [AUTO SELECT].
It is possible for you to set whether to automatically recall the copy
paper and zoom ratio previously stored in memory when 2in1 is
selected. The default setting is "Select" with settings of "Auto Paper"
for Paper Source and " × 0.707" for Zoom.
Set the image level of the Auto Color mode towards monochrome or
full color as necessary. The initial setting is "Std."
Setting the Utility Mode
CF9001
Advertisement
Table of Contents
