Table of Contents
Advertisement
When a Message Appears
6.5
When the Message
"The Fuser Oil has run out." Appears
The message shown on the left
appears when the fuser oil is running
out. You can still make copies, but it is
recommended that you replenish the
fuser oil as soon as possible.
When fuser oil has run out, the
message shown on the left appears
and you can no longer start a new copy
cycle. Replenish the fuser oil by
following the procedure given below.
Usually, the fuser oil replenishment should be performed by a qualified
service representative. However, on an as need basis, the copier can be
set so that a trained operator can replenish the fuser oil. In this case, we
recommend that only a trained key operator replenish the fuser oil
according to the following procedure.
Replenishing the Fuser Oil
1
Open the front door.
2
Turn the lever "M4" to the left. Grasp
the lever "M6" and slide out the
transfer/fusing unit.
CF9001
6
M6
M4
6-19
Advertisement
Table of Contents
