Table of Contents
Advertisement
Making Copies
Capacity of the manual bypass tray:
l Plain paper, Thin paper, Thick paper 1 ... Up to 90 sheets
l Plain paper/Thin paper (once-copied paper), Thick paper 2 ... Up to
50 sheets
l OHP films ... Up to 40 sheets.
Using the Manual Bypass Tray
1
Place the original on the original glass.
2
Swing down the
manual bypass tray.
3
Insert a neat stack of copy paper
into the manual bypass tray until it
stops and slide the paper guide
plates to the size of the copy paper.
NOTES
è
Load the OHP films so that the front
side (on which the white line is
printed) faces up in the direction as
shown.
è
Use only the recommended OHP
filmes.
è
Only plain paper can be used for 2-sided copies.
è
When inserting paper with one side previously printed, load the paper
stack so that the blank side faces down.
è
Make sure that the top level of the original stack does not exceed the
M marking.
CF9001
3
3-15
Advertisement
Table of Contents
