Table of Contents
Advertisement
4
If the original is a non-standard size:
è
Touch [CUSTOM SIZE] on the
screen given in step 2.
è
Touch [X] and enter the length of
the original into the 10-key pad.
Then touch [Y] and enter the width
of the original into the 10-key pad.
(To correct a value entered, press a
Clear key.)
è
Touch [OK].
If the original is a photo size:
è
Touch [PHOTO SIZE] on the screen
given in step 2.
è
Select the size of your photo and
touch [OK].
If an appropriate size is not
available, enter the size into the 10-
key pad.
Using 10-key pad
Touch [X] and enter the length of the photo into the 10-key pad. (If a
value has already been set, press the Clear key, then enter the new
value.)
Next, touch [Y] and enter the width of the photo into the 10-key pad.
Useful Tip
A frequently used photo size can be stored in copier memory, see
page 3-47.
4-36
Professional Way to Make Color Copies
CF9001
Advertisement
Table of Contents
