5
5.4
Gradation Adjust
Carry out a Gradation Adjust sequence if the copier fails to reproduce
color or the reproduced color becomes foggy as you make a number of
color copies.
Gradation Adjust Sequence
1
Press the Utility key.
2
Touch [ADMIN. MODE].
3
Enter your administrator code
number into the 10-key pad, then
touch [OK].
NOTES
è
Your Technical Representative sets or changes the administrator
code number. Consult him or her for more details.
è
Be sure to remember your administrator code number.
5-18
Setting the Utility Mode
CF9001