Table of Contents
Advertisement
Getting to Know Your Copier
Pos.
Specification
5
10-Key Pad
6
Copy Key/Scan Key
7
Access Mode Key
8
Energy Saver Key
9
Interrupt Key
10
Panel Reset Key
11
Clear Key
12
Stop Key
13
Start Key
14
Auto Color
Full Color
Black Keys
CF9001
5
14
13
12 11
Description
Use to:
l
Enter the number of copies to be made.
l
Enter the zoom ratio to be used.
l
Enter the number of originals.
Press to select the scan mode or copy mode. The scan
mode can be used when the optional printer controller is
mounted.
When the copy cycle is completed, press this key to go to
the "Access # Prompt Screen."
For details see page 2-15.
Press to set the copier into the Energy Saver mode see
page 2-13.
Press to interrupt a current job with a different one. Press
it again to return to the previous job see page 2-14.
Press to set the copier into the initial mode, clearing all
settings made previously on the control panel,
see page 2-13.
It does not, however, clear the settings made immediately
before the Interrupt mode.
Press to:
l
Reset the multi-copy entry to 1.
l
Clear a zoom ratio entered when setting one using the
10-key pad.
Press to stop a multi-copy cycle.
l
Press to start a copy cycle.
l
If pressed while the copier is warming up, it enables the
Auto Copy Start function, see page 2-14.
l
When Auto Color is selected, the copier automatically
checks and determines whether the original is in color
or black-and-white and makes a full-color or black-and-
white copy according to the original.
l
When Full Color is selected, the copier makes a full-
color copy even if the original is in black-and-white.
l
When Black is selected, the copier makes a black-and-
white copy even if the original is in color.
6
7
8
9
10
2
2-7
Advertisement
Table of Contents
