Basic Copying Procedure; Placing Originals - Minolta EP2050 Operator's Manual

40

2. Basic Copying Procedure

Placing Originals

Place the original face down on the Original Glass.
Different methods are used to load the originals depending on the type of
originals and whether the copier is equipped with an Automatic/Duplexing
Document Feeder AF-3/AFR-7 (option).
Sheet Originals (Standard Size)
Highly Transparent Originals
1 Raise the Original Cover.
Place the original face down on
the Original Glass and align its
rear left corner with the
marker on the Original Width
Scale on the left side of the
platen.
1139O0050A
2
Gently lower the Original Cover.
1 Place the original in the same
way as the sheet originals.
2 Place a blank sheet of paper of
the same size as the original over
the original. Then lower the
Original Cover.
1139O0070A
If this is not done, the copier will
not be able to detect the size of
the original and the Auto Paper
or Auto Size function is disabled.
Further, the copy produced may
be of poor quality.
NOTE