Canceling Jobs - Xerox WorkCentre M24 Reference Manual

5.1
This section describes how to cancel a job in progress and pending job(s).
When you cancel a broadcasting job in progress, all pending jobs and a job in progress designated as broadcast are
canceled.
Canceling a job during scanning
Procedure
1
When the following screen appears, select Stop on the screen or press
Stop on the control panel.
When this screen does not appear, see the instructions in "
Scanning documents...
Fax Store
: 0123456789
Type: Single Terminal
Pages
Standard
The machine pauses and the screen shown below appears.
5
2
Select Stop on the screen or press Clear on the control panel.
Transmission stops.
Ready to scan.
Load the next set of documents and press Start.
Or, select Last Original when the scanning completes.
Fax Store
: 0123456789
Type: Single Terminal
Pages
A 4
Standard
To continue transmission, select the Start button on the screen or press the Start button on the control
panel.
62

Canceling Jobs

:Doc. No. 00010
1
:
Doc. No. 0010
1
:
Canceling a Pending Jobs".
Stop
Stop
Last Original
Next Original
Close
Stop
Last Original
Next Original
Start