Xerox WorkCentre M24 Reference Manual page 219

10. Auto Switch Time
This function sets how many times the machine rings for incoming before fax communication is
started. When an incoming call is from a telephone, pick up the handset or external telephone
(option) within the set time to speak with the remote party. If you hear a facsimile tone, press the
Manual Receive button.
Use the numeric keypad to enter the desired value. A value from 0 up to 9 times can be set in 1 time
increments. The default value varies depending on the country.
To use this item, it must be set by an engineer.
This item does not function in some countries.
Setting value
0
1 to 9
11. Fax Receiving Mode
This function allows you to set the default value for the Fax Receiving Mode.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Auto Receive.
For details on the Fax Receiving Mode, see "6.1 Reception Mode" (P. 68).
Setting value
0
1
12. Border Limit
This function sets the value to divide a document onto two pages, when the received documents are
longer than loaded paper size. We recommend using this feature with the Auto Reduce on Receipt
feature.
Referring to the table below, use the numeric keypad to enter the desired value. A value from 0 up to
127 mm can be set in 1 mm increments. The default value 16 is 16 mm.
For details on Border Limit, see "6.2.5 Reducing Images at the Recipient Side" (P. 75).
Setting value
0
1 to 127
Switches to fax as soon as the call is received.
Switches to fax after the set number of rings.
Auto Receive
Manual Receive
No division
Pages are divided according to the set value.
Description
Description
Description
9.8 Other Items
9
195