Send To Mailbox (Dtmf Method) - Xerox WorkCentre M24 Reference Manual

6
Use the numeric keypad to enter the Password and select Next .
If a password has not been programmed, you do not need to use one. Then select the Next button with-
out entering a password.
Use the Numeric Keypad to enter the password.
Remote Mailbox
Off
On
7
Select Save .
8
Dial a remote party, then press Start .
Scanning and transmission begins.
G For details on how to dial a number, see "3.4 Dialing" (P. 27).
G For details on how to confirm and cancel the transmission of a document, see "Chapter 5 Confirm-
ing and Canceling a Communication" (P. 61).
8.14.2

Send to Mailbox (DTMF Method)

To perform this operation, you must know the mailbox number of the remote
machine.
This refers to the mailbox number programmed on the remote machine.
There are two methods of sending to mailbox by DTMP as follows:
Sending to mailbox automatically
The dialing format is as follows.
Telephone number of
remote machine
Sending to mailbox manually
The dialing format is as follows.
Telephone number
of remote machine
8.14 Using the Mailbox Feature (Remote Mailbox/Retrieve from Mailbox)
Memory :100%
Cancel
Remote Mailbox Number
(Example: 001, 010, 100)
001
Password
9
Mailbox number of remote machine
Confirm the
Confirm the continuous,
facsimile tone short high-pitched tone
Password for mailbox
of remote machine
Next
Recipient
Save
Next
Password for mailbox of remote machine
Mailbox number of
remote machine
The continuous,
Select Start
short high-pitched
tone sounds
8
121