Xerox WorkCentre M24 Reference Manual page 256

11.1 Troubleshooting
The touch
panel display
is dark.
The telephone
continues to
11
ring.
Received data
is not printed.
The transmit-
ted image
quality is poor.
232
Items to
Status
check
Is the Power
Saver button
on?
Is the Bright-
ness Adjust-
ment Dial set
too low?
Power off?
Set to Manual
Receive?
Is the Auto
Switch Time
set too long?
Is the System
Administration
Mode on?
Is the docu-
ment loaded
correctly at the
remote
machine?
Is the docu-
ment scanner
clean?
Are the set-
tings for den-
sity correct?
Is there any
problem with
the remote
machine?
Countermeasures
The machine is in a power save mode. Press the Power
Saver button or any other button to exit this mode.
Use the Brightness Adjustment Dial to adjust display
brightness.
Turn the power on.
Select Auto Receive.
"6.1 Reception Mode" (P. 68)
Change the settings.
"9.8.7 Fax Control" (P. 192)
The machine cannot receive documents in the System
Administration Mode. Exit the System Administration
Mode.
Ask the remote station.
Poor output quality may be caused by the remote machine.
Clean the document scanner.
Adjust the density level.
"3.1.3 Lighter/Darker" (P. 21)
Ask the remote station.
Poor output quality may be caused by the remote machine.