Xerox WorkCentre M24 Reference Manual page 217

2. Send Header-Polling
This function determines whether or not the Send Header is to be added to a Document for Public
Polling.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 1 is
On.
For details on Store for Polling, see "8.12 Preparing to Be Polled (Store for Polling)" (P. 112).
Setting value
0
1
3. Document for Polling
This function determines whether to delete data for a Document for Public Polling from the memory
automatically after transmitting the document.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Save.
For details on Store for Polling, see "8.12 Preparing to Be Polled (Store for Polling)" (P. 112).
Setting value
0
1
4. Rotate 90°
You can set the image to rotate automatically so that the image can be transmitted without reducing
the image size by rotating the image orientation. This feature is not available when the Multiple Up
feature or Variable % in the Scan Size feature is selected.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 1 is
On.
Setting value
0
1
5. Sender ID
This function determines whether to display the G3 ID on the screen at a remote machine when using
G3 transmission. Referring to the table below, use the numeric keypad to enter the desired value. The
default value 1 is On.
Setting value
0
1
Off
On
Save
The document is automatically deleted after retrieval.
Off
On
Off
On
Description
Description
Description
Description
9.8 Other Items
9
193