Transmitting By A Specified Telephone Line - Xerox WorkCentre M24 Reference Manual

3.2
Transmitting by a Specified
Telephone Line
Special symbols can be used to select lines during transmission.
This section describes procedures for selecting lines for transmission and adding outside
lines with an optional fax (G3/NCU additional).
3.2.1
Transmitting by a Specified Telephone
Line
When multiple lines are used, you can specify a line (port) for transmission. It is
useful to program local fax information for each line and select a telephone line.
For details on how to register Local Information, see "9.2 Entering Local Terminal Information"
(P. 145).
Procedure
1
Load documents.
"2.2 Loading Documents" (P. 14)
2
Display the Fax screen.
Enter recipient's Fax No.
[ Fax No. ]
Outside Line
Basic Features
iFax/Fax
Address Book
Keyboard
A B C
3
Select Keyboard to display the keyboard on the touch panel and enter
the following format.
Port(line)
number
Port numbers are line 1 → "1", line 2 → "2"and line 4 → "4"
G
G Line 2 and 4 can be specified when an option is installed.
Memory :100%
On-Hook/
Scan Options Send Options
Others
Resolution Original Type
Standard Text
Fine
Text & Photo
Super-fine (400dpi) Photo
Super-fine (600dpi)
Dial number
Next
Recipient
Menu
Lighter/Darker
3
23