Xerox WorkCentre M24 Reference Manual page 292

13.2 Setting the Environment
Set the E-mail environment in E-mail in Protocol Settings in the Property screen
in Internet Services, while referring to the following table.
Receiving pro-
tocol
Print Mail
Headers and
Contents
Print error
mail
Split size of
13
outgoing mail
POP3 server
address
POP3 server
check interval
POP user
name
POP user
password
268
Item Description
Set the method to receive E-ail
in compliance with the environ-
ment you are using.
Set the text to be printed when
a TIFF file and E-mail are
received and printed If you wan
to print the route of the E-mail,
set All headers and text.
Check the Valid checkbox, to
print error notification mail,
when E-mail cannot be sent
because of an error.
Set the number of pages to
split the manuscript into while
the machine is scanning it,
when sending E-mail.
Set the number of pages to split the
manuscript into after checking on
the environments of the sending
side and the receiving side.
Depending on the system environ-
ment, if you set a large value, E-
mail can not be sent or received.
Set the POP3 server address
for sending E-mail.
Set the interval to check the E-
mail in the POP3 server.
Set the user name for connect-
ing to the POP3 server.
Set the password for the POP
user name, enter the password
in Confirm POP user password.
Settings required
for the reception
Value
SMTP
SMTP*
POP3
None
Auto Mail Contents
Basic Headers and
Contents*
All Headers and
Contents
Enable*
Disable
0 (no splitting)
1 to 999 pages
10 pages
Up to 128 charac- —
ters can be
entered, including
"." (full stop) and "-"
(hyphen).
1 to 120 minutes —
10 minutes*
Alphanumeric —
characters, "." and
"-", less than 64
bytes
Alphanumeric —
characters, less
than 64 bytes
protocol
POP3