Xerox WorkCentre M24 Reference Manual page 4

US Regulatory Information
Fax Send Header Requirements: The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electronic device, including a Fax machine, to
send any message unless such message clearly contains in a margin at the top or bottom of each
transmitted page or on the first page of the transmission, the date and time it is sent and an
identification of the business or other entity, or other individual sending the message and the
telephone number of the sending machine or such business, other entity or individual. (The
telephone number provided may not be a 900 number or any other number for which charges
exceed local or long distance transmission charges.)
To enter the telephone number identifying the machine, and the header text information (business
name), please refer to the Section 9.2, "Entering Local Terminal Information" in this reference guide.
To enter the date and time, please refer to the "Changing Settings in System Settings Mode",
"Setting the Common Settings" in the WorkCentre 24 Machine Administrator User Guide.
Data Coupler Information: This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the Administrative Council for the Terminal Attachments (ATCA) A label
is fixed to the rear cover of the product that contains, among other information, a product identifier
in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the Telephone
Company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A FCC
compliant telephone cord and modular plug is provided with this equipment.
You may safely connect the machine to the following standard modular jack: USOC RJ-11C using
the compliant telephone cord (with modular plugs) provided with the installation kit. See installation
instructions for details.
To order the correct service from the Telephone Company please quote the codes listed in the
table: Facility Interface Code (FIC), Service Order Code (SOC), USOC Jack Code and Ringer
Equivalence Number (REN)
FIC SOC USOC Jack REN
02LS2 9.0F RJ-11C 0.2
WARNING: Ask your local telephone company for the modular jack type installed on your
line. Connecting this machine to an unauthorized jack can damage telephone company
equipment. You not Xerox, assume all responsibility and/or liability for any damage caused
by the connection of this machine to an unauthorized jack.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total RENs,
contact the local Telephone Company. The REN for this product is part of the product identifier that
has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal
point (e.g., 02 is a REN of 0.2)
ii