Setting Preset Points - Speco DVR-4TH User Manual

User's Manual
Iris Open
Press this key to open the Iris and let in more light to the dome camera.
Iris Close
Press this key to close the Iris and let in less light to the dome camera.
Focus Near
Press this key to focus the lens of the dome camera at a near position.
Focus Far
Press this key to focus the lens of the dome camera at a far position.
Zoom In
Press this key to zoom in the lens of the dome camera. This enables the user
to enlarge the designated viewing area.
Zoom Out
Press this key to zoom out the lens of the dome camera. This allows the user
to get a wider range of viewing area.
4.6.5

Setting Preset Points

The DVR-4TH/ 8TH/ 16TH series unit allows users to set preset positions.
The maximum amount of preset points allowed depends on the brand and
model of the dome camera.
Follow these steps to set preset points.
• Press the channel key of any dome camera to view in full screen mode.
• Then press DOME to enter dome control mode.
• Use Pan/ Tilt keys to adjust the dome camera to desired position.
• Press 2 to show or hide the dome control Hint Screen.
54
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Control
Hint Screen
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09