Erase Disc; Quick Video Export Through Front Panel; Ezburn Introduction - Speco DVR-4TH User Manual

4.4.1.4

Erase Disc

This function is used to remove information found on a DVD+RW disk prior to
exporting new information to the drive. Select <Yes> and press ENTER to
start deleting data.
4.4.2

Quick Video Export through Front Panel

The unit provides an easy and quick way, called ezBurn, to export video files
to the built-in DVD+RW or an external device, such as a USB ThumbDrive
The video exported via ezBurn is saved as *.drv file.
If an external device will be the destination of the video, make sure it has
been connected to the unit and the port has been set appropriately.
Exporting process may take about 10 minutes to 1 hour depending on the file
size of the video.
4.4.2.1

ezBurn Introduction

The ezBurn function provides users a convenient way to export video with
built-in DVD-RW or to external storage devices, such as USB ThumbDrive
TWO keys (SEARCH and COPY) and THREE touches are all that will be
needed to complete the export. The whole exporting process is done through
the front panel operation, but no need to access the OSD setup menu.
The ezBurn export process is illustrated as the following:
The process is described step by step in the following sections.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
NOTE: Once an external device has been connected to the unit, the
device has priority over the built-in DVD+RW. That means the video
will be exported to the external device instead of the built-in DVD+RW.
User's Manual
®
.
®
.
47