Network Setup; Lan Select - Speco DVR-4TH User Manual

5.1.7

Network Setup

The Network Setup menu allows the account with appropriate privilege to
configure the network by specifying the network related settings, such as IP
address and Netmask, etc.
See your network administrator and/or network service provider for more
specific information.
Some settings under the Network Setup menu, such as IP and PPPoE
Account, need to be configured through the virtual keyboard. The function key
usage pattern is slightly modified, please refer to section Key Usage in Virtual
Keyboard.
From the System Setup menu, select <Network Setup> and press ENTER.
The following menu displays.

1. LAN Select

2. LAN Setup
3. Modem Setup
4. Trigger Port
5. Email Address
6. SMTP Setup
7. DDNS Setup
8. UPnP Setup
Items in this menu are described in the following sections.
5.1.7.1 LAN Select
PPPoE stands for Point-to-Point Protocol over Ethernet, which is a
specification for connecting the users by Ethernet to the Internet through a
common broadband medium.
This item allows you to select your service type between <LAN>, <PPPoE> or
<None>; if you are using an intranet for communication, please select <LAN>,
if you are using a broadband medium, such as DSL Line or cable modem,
please select <PPPoE>.
If <None> is selected, then there is no need to set further LAN setting,
therefore, the second item <LAN Setup> will not be accessible.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
Network Setup
User's Manual
LAN
80
69