Alert Configuration Set; Alert Ip; Alert Port; Alert Interval - Speco DVR-4TH User Manual

User's Manual
5.6.5.1

Alert Configuration Set

<Alert Configuration Set> provides 3 combinations of Alert Notification, IP,
and Port.
5.6.5.2 Alert Configuration
4 options are included in this item; <OFF>, <Event>, <Alive>, and <Both>.
<OFF>:
<Event>: When the alarm is triggered, the DVR will send an alert message to
<Alive>: The DVR will send an alive message to the CMS every N second
<Both>: This enables the DVR to send both Event and Alive alert package
5.6.5.3

Alert IP

The Alert IP must match the IP address of the computer.
5.6.5.4

Alert Port

The ports for both DVR and the CMS Alert must be the same.
5.6.5.5

Alert Interval

To define the time interval (1 to 255 seconds) between each alive message.
5.6.6

Event Full Screen

This function allows the unit to display the alarm channel in full screen size
when an alarm is triggered.
Select <None> to enable this function; select <Main> to display the alarm
channel on Main Monitor when an alarm is triggered; select <Call> to display
the alarm channel on Call Monitor; and select <Both> to display the alarm
channel on both Main Monitor and Call Monitor.
108
The Alert Notification is turned off.
the CMS.
just to show you that the connections between the DVR and CMS
are in effect. The time interval N can be adjusted in <Alive
Interval>.
to the CMS.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09