Advance Streaming Option; Streaming Port; Streaming Protocol; Ip Dome Protocol - Speco DVR-4TH User Manual

Advance Streaming Option

Select <OFF> and the Streaming Port and Streaming Protocol will be set
automatically according to the camera model selected. Alternatively, select
<ON> to manually set the Streaming Port and Streaming Protocol.

Streaming Port

Streaming port is used for transmitting video and related commands.

Streaming Protocol

Enter this item to select the streaming protocol of the IP camera. The DVR
supports the following streaming protocols: <RTP+RTSP>, <RTP/RTSP>,
<RTP/RTSP/HTTP>, and <HTTP>.

IP Dome Protocol

If the connected device is an IP Dome Camera, then select an appropriate IP
Dome Protocol from the provided options.
5.3.2.6

Device Setup

Enter this item to setup the basic settings of the IP camera. Upon entering this
item, the following message will be displayed.
If the connection cannot be detected, the following message will be displayed.
Please check the <Hostname/IP>, <Model>, and <Connection Setup> again
to make sure the settings are correct.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
NOTE: Please contact manufacturer of the IP camera for assistance if
the IP camera's Management Port/ Streaming Port/ Streaming Format/
Streaming Protocol are unknown.
Collecting data
Cannot get config from the IP device
Please wait!
User's Manual
95