Advanced System Configuration; Username And Password - Speco DVR-4TH User Manual

User's Manual
5.

Advanced System Configuration

The detailed functions and settings of the DVR-4TH/ 8TH/ 16TH series unit
can be set by using the hierarchical OSD setup menu. Collaborating with a
USB mouse, setting up the DVR can be easy as operating on a PC. This
chapter describes the menu items and options in the OSD setup menu.

Username and Password

Press MENU and input a valid username. There are two preset accounts:
"admin" and "user". "admin" can be inputted via pressing the hot key MENU,
while "user" can be inputted via pressing the hot key SEARCH. Move to <OK>
and press ENTER to proceed.
The next step is to enter a corresponding password. he preset password for
"admin" is "1234".
An icon displayed at the center-bottom of the screen will show the authority
level of the account. Under logout condition, the icon will show "N". When an
account is logged in, its authority level number (1~8) will be shown.
58
Input Username
A B C D E F G H I
N O P Q R S T U V W X Y Z
a b c d e f g h
n o p q r s
0 1 2 3 4 5 6 7 8 9 .
# − _ , " + = *
◄ ►
Cancel
Password Verification
____________
Press Channel Keys To Enter Password
Press ◄ Key To Delete
NOTE: It is strongly suggested to change the preset password to
prevent unauthorized access to the unit.
J K L M
i j k
t u v w x y z
Backspace Delete
OK
(4-8 Digits)
l m
! @
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09