The author assumes no responsibility for any errors or omissions that may appear in this document nor does it make a commitment to update the information herein. INDEX ...3 ...6 ANEL ...7 ONTROLS ...9 ONTROLS ... 10 ... 12 ... 35 V1.0 P/N:040506-CS DVR-4CF...
Do not expose to extreme temperatures. Use the product at temperatures within -10∘C ~ +50∘C. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTIO N : DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DVR-4CF...
Education/ Military/ Government Organization: Important facilities, important areas, rapid transit system, and railroad safety. Recreation/ Activities: Sports and news broadcast. Home: Elevator, doorway, community safety, and hotels. Hospital/ Kindergarten: Hospital and isolated ward, home for the aged, kindergarten, and baby nourishing center. DVR-4CF...
PC. Removable hard disk box. Removable hard drive mechanism allows you to backup important data with ease. Live monitoring through internet from anywhere (optional). Built-in TCP/ IP network interface (auto detects and switches to 10/ 100Base T). DVR-4CF...
Check to make sure all of the items shown below are included in your product package. If something is missing, contact your dealer as soon as possible. (1) DVR (digital video recorder) (2) Power adapter (3) Power Cord (Plug type differs depending on area) DVR-4CF...
5. INSTALLATION 5.1 Connectors on the Rear Panel Please setup the connection by following the illustration shown below (network is an optional function): DVR-4CF...
: Press this button to confirm after data input. (10) UP/ LEFT : Press this button to move the cursor up or down. (11) DOWN/ RIGHT : Press this button to move the cursor left or right. (12) REC LED : LED lights while recording. DVR-4CF...
Page 9
(19) REW : Press this button under playback to start reverse scanning. (20) PLAY : Press this button under playback mode to start playback. : Press this button under playback mode to start fast-forward (21) F.F. scanning. (22) CF-CARD SLOT DVR-4CF...
《 ALL SETTING DATA IS INITIALIZED.》 will be displayed by flashing 3 times, and after reset the password will be set as default value (111111). When reset procedure has been completed, the message“ DVR RESET COMPLETED. TURN OFF AND ON THE DVR"will be displayed, then please restart the DVR. DVR-4CF...
Note:CH1: No block figure next to CH1 indicates that it is not recording. EACH: Record Type QUAD: Record Type (T): TIMER RECORD (A): ALARM RECORD (M): MIX RECORD (□): Currently under recording. VIDEO LOSS: Video input unable to be detected. CAMERA1: Name for CH 1. OFF: Channel is set to “OFF”. DVR-4CF...
5. Press《FF》button to fast-forward playback. 6. Press《REW》button to reverse playback. 7. Press《STOP》button to stop playback. TIME SEARCH HARD DRIVE: MASTER >01 TIME 2003/11/27 18:20:42 02 TIME 2003/11/27 16:43:56 03 TIME 2003/11/27 15:07:11 ) MOVE (ENTER)CHANGE (PLAY)PLAY >01 TIME Total 7 >07 DVR-4CF...
CF card, before withdrawing it from the slot. Otherwise, error may occur, system displays “CF CARD REMOVED”, and auto returns to live display. 5. Camera name may only be viewed during recording display and under live display. DVR-4CF...
Under main menu (first menu layer), the system will enter live mode. Press《ENTER》button, to increase or decrease the setting values that has been highlighted. (4) Menu Layer Operation Guide (1) :First Menu Layer (Main Menu) :Second Menu Layer :Third Menu Layer :Fourth Menu Layer DVR-4CF...
5. “System Setup"is situated on the second menu layer. Under this menu layer user may setup the system time, password, and return system to default value, etc (VERSION displayed represents the FIRMWARE version). SYSTEM SETUP V1.0 PRESS(< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■ DVR-4CF...
PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (^) position indicates the current time and date selected. 2. Use《←》or《→》button to move the cursor. 3. Use《ENTER》button to setup time and date. 4. Use《MENU》button to exit “Time Setup”. ■■■ TIME DVR-4CF...
(Default Password: 111111). 6. When password is setup to “ON”, user will be requested to enter the correct password to stop recording (Default Password: 111111). PASSWORD SETUP PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■■ DVR-4CF...
If password entered is incorrect, you will receive a message “NO PASSWORD CHANGED” to inform you (message flashes three times) and the system returns to “Password setup” selection. ■■■■ PASSWORD :_ _ _ _ _ _ PRESS (MENU) TO EXIT DVR-4CF...
3 times, and returns to default value. When reset procedure has been completed, the message“DVR RESET COMPLETED TURN OFF AND ON THE DVR"will be displayed, please restart the DVR. 3. Press《MENU》button to exit “Load Default Setup” selection. PRESS (ENTER) TO RESET PRESS (MENU) TO EXIT ■■■ DVR-4CF...
3) Select (- - - 4), only camera four is operational (CH4 image display only). 7. When proceeding “CH1 TITLE”, press 《ENTER》 button to show the display below: CAMERA SETUP 1234 ---- CAMERA1 CAMERA2 CAMERA3 CAMERA4 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■ DVR-4CF...
Page 22
8. All channel titles are setup the same way. Once the user formats the hard disk drive, the camera title returns to its default setting (CAMERA1/ CAMERA2/ CAMERA3/ CAMERA4). It is because this setup is stored in the hard disk drive. CAMERA1 12345678 DVR-4CF...
10. CONTRAST: Press 《ENTER》 button to adjust the camera contrast (15 contrast adjustment values, default value: 08). 11. BRIGHTNESS: Press《ENTER》button to adjust camera brightness (15 color adjustment values, default value: 08 ). CAMERA SEUP PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■■ DVR-4CF...
“T” mode is setup under schedule record mode. 9. MOTION RECORD FRAMERATE: Press 《 ENTER》 button to setup different recording speeds per channel, suitable when the recording speed under RECORD SETUP EACH NORMAL PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■ DVR-4CF...
< M A T T T T T T T T T T T T T T T T T T T T-T > PAL :25,12,8,6,4,3,2,1fps. RECORD MODE T: TIME A: MOTION+SENSOR M: TIME+MOTION+SENSOR PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■■ DVR-4CF...
Page 26
(1) When motion has been detected, it will be recorded by “Motion Record Speed”. (2) When sensor has been triggered, it will be recorded by “Sensor Record Speed”. ※ When both “MOTION” and “SENSOR” has been triggered, it will be recorded by “Motion Record Speed”. DVR-4CF...
7. VIDEO LOSS ALERT: Press 《ENTER》 button to setup “ON” or “OFF”, whether to trigger the alarm when video loss has been detected (this setup is only active when the system is under record or live status). BUZZER SETUP PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■ DVR-4CF...
4. Press《MENU》button to exit “EVENT LIST” selection. 5. “EVENT LIST"is situated on the second menu layer. Under this menu layer user may setup “TIME SERACH” or “EVENT SEARCH”. EVENT LIST PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■ DVR-4CF...
2. Press《←》and《→》button to select the desired time and date. 3. Press《ENTER》button to setup playback starting time and date. 4. Press《MENU》button to exit “TIME SEARCH” selection. 5. Press《PLAY》button to play. TIME SEARCH 05/01/13 19:27:16 05/01/13 19:27:16 05/01/15 15:00:06 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■■ DVR-4CF...
※ BEGIN: 05/01/15 15:00:01 Displays the beginning and end time of each event. EVENT SEARCH END: 05/01/15 15:00:06 2005/01/15 15:00:01 2005/01/15 14:00:01 2005/01/15 13:00:01 2005/01/15 12:00:01 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT END: 05/01/15 15:00:06 ■■■ DVR-4CF...
※ Note! Format the CF card (FORMAT/ ERASE) before first time use. ※ Please do not use the format (FORMAT) function supplied by the personal computer, data may be lost due to such action. CF CARD SETUP 512MB 100MB PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■ DVR-4CF...
※ When the message “Time Input Error” is displayed on the screen, indicates that the time date entered is incorrect or no data. The system auto returns to CF Card setup selection. SELECT TIME 05/01/15 15:00:01 15:00:06 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT ■■■ DVR-4CF...
(2)Estimated time to complete data copy. (3)Request to confirm copy. (4)When the data capacity is greater than the remaining storage capacity, the message “CAPACITY IS NOT ENOUGH” will be displayed. (5)Data copy percentage completed. (6)Press《ENTER》button to start copy. (7)Press《MENU》button to exit “Copy Display”. ■■■■ DVR-4CF...
“PASSWORD CORRECT”, “CF CARD FORMATED” (flashes 3 times), indicates CF Card format is successful. 3. When password entered is incorrect, the screen will display “PASSWORD INCORRECT” (flashes 3 times), and returns to “CF CARD SETUP” selection. ※ This password equals to hard disk format password. ■■■ DVR-4CF...
2. When password entered is correct, the screen will display the message “HDD FORMATTED” (flashes 3 times), indicates hard disk format is successful. 3. When password entered is incorrect, the screen will display “PASSWORD INCORRECT” (flashes 3 times), and returns to “HARD DRIVE SETUP” selection. DVR-4CF...