Ip Camera Support; Audio Output; Key Beep - Speco DVR-4TH User Manual

User's Manual
5.1.9.1

Audio Output

The item is used to set the audio output mode. The available options are as
listed as follows.
<Live/PB>
Select this item to play the recording sounds of live image in live mode, and
sounds of recorded video in playback mode respectively.
<Always Live>
Select this item to play live sounds in both live mode and playback mode.
<OFF>
Select this item to disable the audio output function.
5.1.9.2

Key Beep

This item is used to enable or disable the key tone. Select <ON> to enable
the key tone, or <OFF> to disable.
5.1.10

IP Camera Support

Enter this item to add IP cameras to the DVR. The DVR supports up to 4 IP
cameras. Select <0> will make the DVR act as a traditional analog DVR.
Select <1> to <4> allows users to add 1 to 4 IP cameras to the DVR.
After the <IP Camera Support> is set to <1> to <4>, the following message
will be displayed. Press ENTER to apply the changes, or ESC to exit.
86
DVR must reboot to apply the change
ENTER: Yes
NOTE:
1. The existing database will NOT be re-formatted after switching to
this function.
2. Alarm I/O, Motion detection function, and audio of the IP camera
are NOT currently supported
Notice!!
ESC: No
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09