Email Address; Smtp Setup; Email Via Smtp; Smtp Server - Speco DVR-4TH User Manual

User's Manual
5.1.7.5

Email Address

This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
• Select <Email Address> from Network Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to move the cursor for selecting character.
• Press ENTER to add the selected character to the password entry field.
• When done, move the cursor to <OK> and press ENTER to save the
settings and exit.
5.1.7.6

SMTP Setup

Simple Mail Transfer Protocol (SMTP) is a protocol for sending e-mail
messages between servers. SMTP is a relatively simple, text-based protocol,
where one or more recipients of a message are specified and the message
text is transferred.
Select < SMTP Setup> from Network Setup menu and press ENTER; the
menu displays as follows.

1. Email via SMTP

2. SMTP Server

3. SMTP Port
4. SMTP Account
5. SMTP Password
Email via SMTP
This item enables the user to determine if the unit sends e-mail via SMTP.
Select <YES> to send e-mail via SMTP using direction keys; if not, select
<NO>.
SMTP Server
This item enables the user to set the SMTP server. Contact your network
service provider for more specific information.
80
SMTP Setup
ON
25
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09