Speco DVR-4TH User Manual page 75

User's Manual
In Network Setup menu, select <Dial-in Setup> and press ENTER to enter the
Dial-in menu. The menu displays as follows.
1. Dial-in Service
2. Dial-in Account
3. Dial-in Password
4. Server IP
5. Client IP
6. Dial-in Idle Time
7. Dial-in Max Time
Dial-in Service
If the DVR-4TH/ 8TH/ 16TH series unit does not connect to the Internet, the
user can communicate to the unit from a remote PC through a modem as well.
Select <ON> to enable the Dial-in function, or <OFF> to disable.
Dial-in Account
This item enables user to protect access to the unit by establishing or
changing a dial-in user name for modem connection.
To setup the Dial-in Account, follow these steps.
• Select <Dial-in Account> from Dial-in Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to move the cursor to the desired character.
• Press ENTER to add the selected character to the username entry field.
• When done, move the cursor to <OK> and press ENTER to save the
settings and exit.
74
Dial-in Setup
Dial-in Account
A B C D E F G H I
N O P Q R S T U V W X Y Z
a b c d e f g h
n o p q r s
0 1 2 3 4 5 6 7 8 9 .
# − _ , " + = *
◄ ►
Cancel
NOTE: The Server IP and the Client IP must not be identified as the
same IP address; but they have to be set in the same domain.
For example: Server IP= 192.168.0.1 ; Client IP= 192.168.0.2
192. 168. 0. 1
192. 168. 0. 2
J K L M
i j k l m
t u v w x y z
! @
Backspace Delete
OK
OFF
User
XXXX
0 Min
0 Min
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09