Power On/ Off The Unit - Speco DVR-4TH User Manual

3.4

Power On/ Off the Unit

If the DVR-4TH/ 8TH/ 16TH series unit must be shutdown for any reason,
always remember to follow proper shutdown and power on procedures in
order to avoid damage to the unit.
To Power On the Unit
First check if the type of power source available is compatible before plugging
into the unit. Then turn on the unit using the power switch on the rear panel.
The system checking information and color bar will be shown on the monitor.
It will disappear when the unit has been properly powered on.
To Restart/ Shutdown the Unit
Press MENU and input the username and password that has sufficient
authority to access the OSD setup menu. Select <Shutdown> in Main menu
and press ENTER to enter the Shutdown menu, which displays as follows.
1. Power Off
2. Reboot
<Power Off>
Select this item to shutdown the unit. DO NOT disconnect the power during
shutdown until the message "You can safely turn off DVR now!" displays.
<Reboot>
Select this item to restart the unit. The system checking information and color
bar will be displayed on the monitor until the unit is properly restarted.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
NOTE: While the DVR-4TH/ 8TH/ 16TH series unit is shutting down or
rebooting, the recoding and playback of videos will stop to avoid
abnormal images.
Shutdown
User's Manual
Execute
Execute
27