Record Format; Max Rec. Pps; Schedule Setup; Day / Night Time Start / End - Speco DVR-4TH User Manual

5.4.1.2

Record Format

Select format of the recorded video from <H264>, <MPEG4>, or <MJPG>.
5.4.1.3

Max Rec. PPS

This item will be automatically changed according to the setting of the
previous two items. It is "read only".
5.4.2

Schedule Setup

This submenu is used to set the day and night time, or weekend recording
schedule. The Night and Day schedules are used to define daytime and
nighttime; the Weekend schedule is tailored for weekends and holidays.
Select <Schedule Setup> from the Record Setup menu and press ENTER;
the following menu is displayed.
1. Day Time Start
2. Day Time End
3. Night Time Start
4. Night Time End

5. Weekend Schedule

6. Weekend Start
7. Weekend End
• Make appropriate changes for the start time of the Day Time and Night
Time schedule using the Direction keys.
• Press ENTER to confirm the settings or ESC to cancel.
• If you want to record over the weekend, choose <YES> to enable the
Weekend Schedule in advance and then set the Weekend Start/End time.
• Press ESC to back to previous page.
5.4.2.1

Day / Night Time Start / End

The Day/Night Start Time determines the duration of day/ night recording time.
Time is indicated in 1-minute increments. The time display format in this menu
is based on the setting of Time Display Mode.
5.4.2.2 Weekend Schedule
The Weekend Schedule determines whether a weekend schedule is in effect.
Choose <YES> to take effect the related weekend settings.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
Schedule Setup
User's Manual
06:00
18:00
18:00
06:00
YES
Fri 18:00
Mon 06:00
99