Setting Preset Points - Speco DVR-4TL/160 User Manual

4.6.5

Setting Preset Points

The DVR-4TL series allows user to set preset positions; the amount of preset
points depends on the dome manufacturer.
Follow the steps to set preset points.
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter dome control mode.
• Use Direction keys to position the dome camera to desired position.
• Press 2 to view the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
Dome Control
• Press 1 to access the Set/Go Preset function. The Dome Preset menu is
displayed.
• Use UP / DOWN keys to select the desired preset number from the menu.
• Set the <Set Preset> of the selected preset number to <YES>, and press
ENTER to save the position. Now the preset is set and ready to call.
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Preset
Index Set Preset
1 NO
2 NO
3 NO
4 NO
5 NO
6 NO
7 NO
33
Go Preset
NO
NO
NO
NO
NO
NO
NO
User's Manual