User's Manual
3.5.3
Network Time Protocol Setup
This section guides you to synchronize your unit to fit the local time.
Go the <System Setup>
figure and select your time zone from the options.
Then go to <System Setup>
Setup> and select <ON> for the item <Automatically Time Sync>. When this
function is ON, time sync will be performed every hour in order to observe
correct time of your local zone.
30
NOTE: If you want the unit to automatically synchronize the local time,
the <Time Zone> item MUST NOT be set to <OFF>, or the function
cannot be activated.
<Date/ Time>
<Time Zone>. Refer to below
<Date/ Time>
<Network Time Protocol
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09