Export Configuration; Copy Destination; Configuration Name; Begin Export - Speco DVR-4TH User Manual

User's Manual
5.8.3

Export Configuration

The account with appropriate privilege can save a unit configuration by
exporting it to an external drive, such as a USB Flash Drive. Before exporting
the configuration, make sure the device in which the configuration will be
saved is attached to the unit properly. Select <Export Config> from the
Configuration menu and press ENTER. The following menu is displayed.
Items in this menu are described in the following sections.

1. Copy Destination

2. Config Name

3. Begin Export

5.8.3.1 Copy Destination
Select this item to list available destinations (external memory devices) to
which the configuration can be exported. Press UP / DOWN to set a
destination. Please note that saving a different configuration to the same copy
destination with the same file name will overwrite the previous configuration
file without warning.
5.8.3.2

Configuration Name

This item allows the user to assign the exported configuration file a name.
Use the virtual keyboard to enter the configuration file name.
Note that the file name can contain up to 15 characters, with no spaces.
5.8.3.3 Begin Export
Select <Yes> to begin exporting the configuration file, or <No> to abort the
export.
118
Export Config
NOTE: Users are not allowed to select DVD+RW as a copy
destination.
NOTE: We strongly recommend users to export configurations before
upgrading your system, and back it up routinely, just in case an
unexpected situation occurs.
No
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09