Ip Camera Setting; Ip Camera Information - Speco DVR-4TH User Manual

3.6

IP Camera Setting

The distinctive hybrid solution of the DVR enables users to connect IP
camera(s) while others are analog cameras. First enter the OSD setup menu
with a proper account and access <System Setup>
to select the number of IP cameras to be connected. The supported channels
of IP cameras will be from the largest numbers, for example CH16 for 16ch
models.
To configure setting of an IP camera, access <Camera Setup> and select the
channel with the largest number. The menu will be shown as follows.
1. IP Camera Select
2. IP Camera Title
3. Hostname/IP
4. Model
5. Connection Setup
6. Device Setup
7. Activated
8. Status
3.6.1

IP Camera Information

IP Camera Title
Access this item to enter the name of the IP camera to be shown on the
monitor.
Hostname/IP
Access this item to enter the hostname or IP address of the IP camera, for
example 192.168.1.123.
Model
Access this item to select the model of the connected IP camera.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
NOTE: The DVR must be rebooted in order to apply the change of IP
Camera Support option.
NOTE: If the IP camera is already activated, menu items 3 to 5 will be
grayed out and cannot be accessed.
IP Camera
User's Manual
<IP Camera Support>
CH16
CH16
X.X.X.X
No
31