Apply; Activated; Status - Speco DVR-4TH User Manual

Apply

Select <Yes> to apply the above settings, and the following message will be
displayed.
When the settings cannot be applied, the following message will be displayed.
Try to reduce the resolution or FPS of the IP camera. Note that the login
account of the IP camera should have appropriate privilege.
Otherwise, the <Device Setup> setting is completed.
5.3.2.7

Activated

Access this item and select <Yes> to activate the connection to the IP camera.
To deactivate the connection, select <No>
5.3.2.8

Status

After the connection to the IP camera is activated, users can check the
connection status. The menu will be shown as below
.
The information shown on the monitor is "ready only".
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
Cannot set the IP device
NOTE: After changing any item under Device Setup menu, users
MUST set <Apply> to <Yes> to apply the changes, or the settings will
remain unchanged.
NOTE: Once the connection to the IP camera is activated, menu items
<Hostname/IP>, <Model>, <Connection Setup> will be grayed out and
cannot be accessed.
1. Model
2. Resolution
3. PPS
4. Bandwidth
5. Pkg. lost rate
Re-collecting data
Please wait!
Status
User's Manual
****
720*480
10
20 KB/Sec
0.1%
97