Audio Output/ Key Beep; Rs485 Setup; Baud Rate; Bits - Speco DVR-4TH User Manual

5.1.8

RS485 Setup

This menu allows the user to setup the parameters of the unit's RS-485
communications port. From the Main menu, select <RS485 Setup> and press
ENTER. The following menu is displayed.
1. Unit ID

2. Baud Rate

3. Bits

4. Stop

5. Parity

5.1.8.1 Unit ID
This item is used to change the RS-485 ID address of the unit. The ID is with
the range of <1> to <255>. The default is <224>.
5.1.8.2 Baud Rate
The Baud rate options for association with the protocol are <2400>, <4800>,
<9600>, <19200>, <38400> and <57600>. The default is <9600> baud.
5.1.8.3 Bits
The user can specify the bits in a word that are associated with this protocol.
The available options are <6>, <7> and <8> bits. The default is <8> bits.
5.1.8.4 Stop
The user can specify the stop bit associated with this protocol. Options are
<1> and <2> stop bits. The default is <1> stop bit.
5.1.8.5 Parity
This item is used to specify the parity associated with this protocol. Options
are <ODD>, <EVEN>, and <NONE>. The default is <NONE>.
5.1.9

Audio Output/ Key Beep

Enter this menu to setup the audio output or key beep.
1. Audio Output
2. Key Beep
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
RS485 Setup
Audio Output/ Key Beep
User's Manual
224
9600
8
1
None
Live/PB
ON
85